Industrial Pumps For Chemical Plants – Transferring Aggressive Fluids

 


A chemical plant is a place where various chemical processes are carried out. The general purpose of the chemical center is to build a wealth of new chemicals through biological diversity and mineral classification. To successfully transfer those harmful or highly corrosive chemicals, the entire chemical industry needs very powerful pumps. Pumps are a very important part of any chemical industry. So chemical plants should use the most powerful pumps with the most advanced technology.

Sujal Engineering is a leading Indian manufacturer and supplier of industrial pumps for chemical plants or industry. Sujal Engineering has developed very powerful pumps that last a very long time to work in the most difficult environment of the chemical industry.

List of pumps used in chemical industries:

  • Centrifugal Process Pumps
  • Rotary Gear Pumps
  • Slurry Pumps
  • Chemical Pumps
Use of pumps in the chemical industry:

Chemical industries must work with caution against hazardous or hazardous chemicals or liquids; these drinks or chemicals are very harmful to the human body. So the chemical industry needs very efficient pumps, without the problem of leaks for the transfer of chemicals or liquids.

Now below we discuss pumps, their features, and technical specifications:

Centrifugal process pumps:

Centrifugal Process pumps are widely used in all chemical industries. Centrifugal pumps are manufactured to hold highly corrosive or toxic chemicals or liquids in a highly efficient manner. Our centrifugal pumps are manufactured by our experienced team to provide the best performance to handle hazardous chemicals.



The high-quality impeller used in our centrifugal pump circulates the liquid and the central power generated by the pump pushes the liquid out. An impeller is a tool that rotates and transmits fluid to a liquid. Centrifugal pumps are ideal for the chemical industry because they are specially designed to transmit decaying liquid and hazardous chemicals.

Salient Features:

  • Ease of operation: centrifugal pump will max out on the pressure at its dead-head pressure. This will not cause any damage to the system and it is easy to say able to work at medium to low heat
  • Can deal with large volumes of liquid
  • Small in size, which saves a lot of space
  • Low capital cost
  • Easy maintenance
  • No danger creates if discharge v/v is closed while starting
  • Is able to work for medium to low viscous fluid
  • Continuous pulsation-free delivery
  • Less wear and tear in case of corrosive and abrasive liquids

Technical Specification:

  • Type: End-Suction and Back-Pullout Type Centrifugal Pump
  • Capacity: up to 1100 m3/hr
  • Head: up to 150 Meter
  • Pressure : up to 15 kg/cm2
  • Size: 25mm to 300mm
  • Speed: up to 3500 rpm
  • Temperature: up to 350° C
  • M.O.C. : CI, CS, SS304 / 316, SS 304 L/316L, Alloy 20, Hast alloy B or C,CD4MCU, etc…
Rotating gear pumps:

Sujal Engineering has developed rotating gear pumps in the chemical industry. Rotating gear pumps are manufactured to handle and transmit highly corrosive liquids or highly efficient chemicals. Our rotating gear pumps are manufactured by our team of specialized engineers to provide the best quality and quality of pumps with many excellent features.
Our rotating gear pumps are developed by modern technology. A rotating gear pump uses a good suction system to pump fluid. The pump has a casing with dual gears and a crescent connected in a curved manner. As the rotor gear begins to turn, the gear around the teeth begins to converge. The space between the gears and the meshing action that pumps the liquid to remove it is why a good name for removal is given.

Salient Features:

  • Highly efficient performance
  • Compact design
  • Easy maintainable
  • Easy cleanable
  • Low noise
  • Low leakage path
  • Non-corrosive
  • High speed

 Technical Specification:

  • Type: Double Helical Rotary Gear Pump
  • Capacity: up to 195 m3/hr
  • Head: up to 100 Meter
  • Pressure: up to 10 kg/cm2
  • Size: 12 mm to 200 mm
  • Speed: up to 1500 rpm
  • Temperature: up to 200°C
  • M.O.C.: CI, CS, SS304 / 316, SS 304 L/316L, Alloy 20, Hast alloy B or C, CD4MCU, etc

Slurry pumps:

Slurry pumps are widely used in chemical plants. Mud pumps are designed to handle aggressive liquids in chemical plants. The slurry pump is well designed by our team of advanced engineers to transfer slurries from one place to another successfully. Our mud pumps have excellent corrosion resistance, high efficiency to operate in the most difficult chemical plant environment.
The Operating System of the mud pump is that the mud enters the tap through the eye of a rotating impeller that provides circular motion. The slurry is forced out by centrifugal force and travels between the blades of the impeller. The slurry reaches a high speed when it reaches the edge of the impeller. In the casing, its velocity at high speed is converted to compression force. Pumps increase the pressure of liquid and solid particles with the help of centrifugal force and convert electrical energy into kinetic energy to pump mud. This machine makes pumping dangerous liquids easy and easy to repair.

Salient Feature:

  • Made maintenance quick and easy
  • Replacement of wearing parts can be done in the field.
  • With the two parts casing, it is possible to replace the worn front cover without changing the complete casing.

Technical Specification:

  • Range: 3″ to 12″ (75mm to 300 mm)
  • Capacity: 10,000 gpm (2257 m³/hr)
  • Heads to: 240 ft (73 m)
  • Pressure to: 150 psi (1,035 kpa)

Chemical Pumps:

Sujal Engineering has developed chemical pumps that are specially designed for the chemical industry to capture and transmit aggressive and harmful chemicals. Chemical pumps are the first choice for any chemical plant because they are designed to be used in a chemical plant.

Our chemical pumps are available in a variety of different chemical plants. Our pumps work very well and do not reward to carry any liquids and chemicals in the chemical industry. We have made chemical pumps according to industry requirements.
 

Salient Features:

  • Develop higher pressure
  • Robust construction
  • High Efficiency
  • Low maintenance
  • Able to run at lower motor speed

Technical Specification:

  • Type: Centrifugal Pump (with Semi-Open Impeller)
  • Capacity: up to 48 m3/hr
  • Head: up to 60 Meter
  • Pressure: up to 6 kg/cm2
  • Size: 25 mm to 65 mm
  • Speed: up to 3500 rpm
  • Temperature: up to 135° C
  • C M.O.C.: CI, CS, SS304 / 316, SS 304 L/316L, Alloy 20, Hast alloy B or C, CD4MCU, etc

Why Sujal Engineering?

Sujal Engineering is a leading manufacturer & supplier of centrifugal pumps, rotary gear pumps, slurry pumps, and chemical pumps in India and around the world. We are the most recognized manufacturer of industrial pumps. We develop every pump with state-of-art technology for high performance in any industrial application. Each and every pump are verified as per international standards & quality.

For any special range of requirements or further inquiry, visit our website: www.sujalpumps.com



Location: Sujal Engineering 61, Haridham Estate, Near, Adarsh II Estate, Odhav, Ahmedabad, Gujarat 382415, India

Comments

Post a Comment

Popular posts from this blog

Working Principle of Rotary Gear Pump

Image
  Moving fluids plays a major role in any plant's process, and moving those fluids requires energy to liquids through pumps. Since pumps have been around for such a long time, it is no surprise that there are a seemingly endless variety of sizes and types used per the industry's requirement. A rotary gear pump is one of those pumps used to transfer all viscous liquids, oil, and petroleum products. Keep reading to know all about the Rotary Gear Pump and how it works   What Is Rotary Gear Pump? Rotary gear pumps are positive displacement pump that has continuous rotary gear. With the help of gear meshing, mechanical energy is converted into fluid energy and this creates void suction. The space that forms between the gear meshing pulls in the high level of viscous liquid by letting them flow towards the wall surface, and then to the output.   How does The Rotary Gear Pump work? Rotary gear pumps use the movement of rotating cogs or gears to move fluids. This is...
Read more

Centrifugal Pumps: Components, Working, Types & Applications – A Detailed Guide

Image
  Introduction Centrifugal pumps are one of the most popular pumps used in various industries for moving fluids from one place to another. These pumps work on the principle of converting mechanical energy from a motor into kinetic energy, used to drive the fluid through the pump and into the discharge pipe.  The reason why Centrifugal pumps are the first choice for numerous applications is their pumping efficiency, high flow rate, and durable design. There are different types of centrifugal pumps available for diverse applications.  When installing a pump, it is important to choose the right pump type, as it ensures that your pump systems operate for years without any interruption.  To select the right centrifugal pump, you must have complete knowledge of what a centrifugal pump is, its components, different types, working, and so on. This blog will take a detailed look at Centrifugal Pumps and will give you an in-depth understanding of topics such as:  ⦁ Defi...
Read more

Vertical Long Shaft Pump for Petrochemical Industries

Image
  If you’re looking for a perfect solution for fluid transfer, you should consider an end suction pump for your needs. End suction pumps are well-capable and can manage a wide range of fluid types, which is primarily why they’re so popular in almost all industries. The best part? — End suction pumps have become pretty affordable for small, medium, and large businesses. If you’re planning to invest in an end suction pump , it is important to know all about it. In this post, we have shared everything there is to know about end suction pumps so that you can make a well-informed decision. What is an End Suction Pump? An end suction pump is basically a type of centrifugal pump that comes with one impeller, a fluid inlet at the side face, and a fluid outlet at the top.  The fluid that is pumped will gradually increase velocity as it begins passing through the impeller. The built-in diffuser, on the other hand, converts the high velocity into high pressure before relieving the fluid...
Read more